“Amiga 1200(HD) set of replacement capacitors” has been added to your basket. View basket
1,3″ OLED display module for GOEX drive, A500/600/1200 variant
14.50€
1.3″ white OLED display module for GOEX drive, designed to seamlessly fit Amiga 500, 600 and 1200 front panel.
Available in vanilla white, beige, or black color, this module is perfect fit for small box Amigas. Please select your preferred color variant below.
Description
Custom made 1,3″ OLED display module for internal GOEX drives. Clip-on design, installation requires no tools and no modifications to your Amiga chassis.
Please refer to product pictures for more insight on signal wiring.
FlashFloppy hint:
Add following lines to the your FF.CFG file, located in the root folder of your SD card, to get pixel perfect picture:
display-type = oled-128x64
oled-font = 6x13
You may also like…
-
GOEX drive r.2023, SD card version
51.00€ Select options This product has multiple variants. The options may be chosen on the product page
Related products
-
AMI2VGA, buffered Amiga to VGA adaptor
18.00€ Select options This product has multiple variants. The options may be chosen on the product page -
Amiga 600 mainboard keyboard connector
4.50€ Add to basket -
Amiga 600 set of replacement capacitors
8.00€ Add to basket -
Rear panel IO shield for Amiga 1200(HD)
18.00€ – 19.00€ Select options This product has multiple variants. The options may be chosen on the product page
A.P. de Bruijne (verified owner) –
How do I connect to the goex drive ? I didn’t find a display connection manual.
Nygel –
The cable for this has dupont connectors on one end in the picture, and when you look at the board it seems to require them there too.
But dupont connectors won’t fit through the slots in the top of an Amiga case, does this therefore require case modification? If not how are the cables managed?
administrator –
Flat cable is directly soldered to OLED, while the other side of flat cable is, as you say, crimped with bare metal dupont connectors. Without plastic sleeve on, dupont connectors can be simply pushed through vent slot. After that, plastic sleeves are to be installed over metal contact.
Nygel –
That’s great, makes sense, so just a case of carefully encouraging the metal pins through the gap in the case and snapping on the dupont housing once through.
The wires on this look plenty long enough too.
Steven Tibbits (verified owner) –
Can you advise of the connection order for the display when connecting to the goex drive.
I have four grey cables, one with a red stripe but no information as to the order in which the wires connect to 3V-SCL-SDA-GND connections.
Steve Green (verified owner) –
Love this display and enclosure! I used a plastic spudger to part the vents slightly to allow the wires to be pushed through (before fitting the Dupont connectors), and the enclosure fits snugly in the vents. The display is excellent quality, too.