1,3″ OLED display module for GOEX drive, A500/600/1200 variant

(4 customer reviews)


1.3″ white OLED display module for GOEX drive, designed to seamlessly fit Amiga 500, 600 and 1200 front panel.
Available in vanilla white, beige, or black color, this module is perfect fit for small box Amigas. Please select your preferred color variant below.

SKU: OLED1.3 Category:


Custom made 1,3″ OLED display module for internal GOEX drives. Clip-on design, installation requires no tools and no modifications to your Amiga chassis.

Please refer to product pictures for more insight on signal wiring.

FlashFloppy hint:
Add following lines to the your FF.CFG file, located in the root folder of your SD card, to get pixel perfect picture:

display-type = oled-128x64
oled-font = 6x13

Additional information

Weight 20 g
Dimensions 7 × 7 × 3 cm
Enclosure color

Amiga vanilla white, Amiga beige, Semi gloss black

4 reviews for 1,3″ OLED display module for GOEX drive, A500/600/1200 variant

  1. A.P. de Bruijne (verified owner)

    How do I connect to the goex drive ? I didn’t find a display connection manual.

  2. Nygel

    The cable for this has dupont connectors on one end in the picture, and when you look at the board it seems to require them there too.

    But dupont connectors won’t fit through the slots in the top of an Amiga case, does this therefore require case modification? If not how are the cables managed?

    • administrator

      Flat cable is directly soldered to OLED, while the other side of flat cable is, as you say, crimped with bare metal dupont connectors. Without plastic sleeve on, dupont connectors can be simply pushed through vent slot. After that, plastic sleeves are to be installed over metal contact.

      • Nygel

        That’s great, makes sense, so just a case of carefully encouraging the metal pins through the gap in the case and snapping on the dupont housing once through.

        The wires on this look plenty long enough too.

  3. Steven Tibbits (verified owner)

    Can you advise of the connection order for the display when connecting to the goex drive.

    I have four grey cables, one with a red stripe but no information as to the order in which the wires connect to 3V-SCL-SDA-GND connections.

  4. Steve Green (verified owner)

    Love this display and enclosure! I used a plastic spudger to part the vents slightly to allow the wires to be pushed through (before fitting the Dupont connectors), and the enclosure fits snugly in the vents. The display is excellent quality, too.

Only logged in customers who have purchased this product may leave a review.

You may also like…